Licensee sought for a mobile-stabilized platform for medical care or security applications

17.07.2017Published 8 days ago
Technology
TOCZ20170711001
Offers
The Czech researchers active in area of mechatronics have developed wheeled robotized mobile platform intended as a chassis for light off-road vehicle keeping its load in permanent stabilized state. The technology developed is based on previous theoretical research using mathematical and simulation models. New patented active suspension enables multiple special manoeuvres. The aim of the research was developing a technology for transporting defined objects having high demands for maintaining a stable position in difficult terrain.

Licensee for a seat with adjustable pressure profile

04.07.2017Published 21 days ago
Technology
TOCZ20170704001
Offers
Researchers from the Czech university have developed a seat with adjustable pressure profile. The technology offered is based on research in the field of vibration-isolation and comfort of a passenger car. It allows controlling the hardness of a seat's cushioning using the electro-pneumatic feedback circuit. It helps decreasing transmission of vibration to the passenger’s back from the vehicle, thus increasing passenger’s comfort. Although there are solutions on the market for luxury cars (air-conditioned and / or massage seats etc.), such solutions are expensive.

A Czech company specializing in production of the top-class gastrointestinal stents is looking for Indonesian partner(s), experienced in distribution of medical devices and instruments

30.06.2017Published 25 days ago
Commercial
BOCZ20170512001
Offers
A long term established Czech company founded in 1991 following the principles of good manufacturing practice according to the European standards produces high quality and innovative products certified CE mark. The company produces stents for esophagus (nitinol and stainless steel stents with uniques characteristics), biliary duct (nitinol stents with low migration rate, duodenum and colon (nitinol flexible stents). The company has well established worldwide distribution network covering more than 70 countries including Southeast Asia (Malaysia, Myanmar, Thailand, Vietnam, Singapore – currentl

A Czech company is looking for agents interested in portable multi purpose units suitable for harsh and remote environments

26.06.2017Published 29 days ago
Commercial
BOCZ20170613001
Offers
A Czech exclusive distributor of mobile work shelter for Europe and Middle East is looking for cooperating partners. The company is looking for agents that will help to find new business possibility on the local market and provide follow-up services. The cooperation on the basis of commercial agency agreement is considered. The company will train the staff of the partner. The company would like to broaden its activities to Ireland, Iceland, Great Britain, Norway, Sweden, Finland, Russia, Ukraine, Belarus or to other European countries.

A new technology for large volume atmospheric plasma modification/cleaning of waste air and surface activation of solids or powders.

08.06.2017Published 47 days ago
Technology
TOCZ20170608001
Offers
The Czech spin-off company was founded in 2015 in order to launch a commercialisation of the technology based on patented rotating gliding arc. The technology is suitable for cleaning of large volume contaminated air/gases (gasses remediation) and treatment of powders in quantity of kg/min.

H2020 – FETOPEN-01-2016-2017: Novel object identification for future digital society.

05.06.2017Published 50 days ago
The evolution in marking of materials began with bar code and continued with two dimensional codes through matrix 3D code to radio frequency identification chips (RFID). All these data carriers are created on the product surface and the information is not protected against damage or destruction. Moreover, formats of these codes are not capable to be extended to the future digital society needs. The Czech university is looking for project partners for upcoming project aimed at development of new physical method to create machine - readable coinage inside of the product material.

H2020 – FETOPEN-01-2016-2017: Novel object identification for future digital society.

05.06.2017Published 50 days ago
The evolution in marking of materials began with bar code and continued with two dimensional codes through matrix 3D code to radio frequency identification chips (RFID). All these data carriers are created on the product surface and the information is not protected against damage or destruction. Moreover, formats of these codes are not capable to be extended to the future digital society needs. The Czech university is looking for project partners for upcoming project aimed at development of new physical method to create machine - readable coinage inside of the product material.

H2020 – FETOPEN-01-2016-2017: Novel object identification for future digital society.

05.06.2017Published 50 days ago
The evolution in marking of materials began with bar code and continued with two dimensional codes through matrix 3D code to radio frequency identification chips (RFID). All these data carriers are created on the product surface and the information is not protected against damage or destruction. Moreover, formats of these codes are not capable to be extended to the future digital society needs. The Czech university is looking for project partners for upcoming project aimed at development of new physical method to create machine - readable coinage inside of the product material.

H2020 – FETOPEN-01-2016-2017: Novel object identification for future digital society.

05.06.2017Published 50 days ago
The evolution in marking of materials began with bar code and continued with two dimensional codes through matrix 3D code to radio frequency identification chips (RFID). All these data carriers are created on the product surface and the information is not protected against damage or destruction. Moreover, formats of these codes are not capable to be extended to the future digital society needs. The Czech university is looking for project partners for upcoming project aimed at development of new physical method to create machine - readable coinage inside of the product material.

H2020 – FETOPEN-01-2016-2017: Novel object identification for future digital society.

05.06.2017Published 50 days ago
The evolution in marking of materials began with bar code and continued with two dimensional codes through matrix 3D code to radio frequency identification chips (RFID). All these data carriers are created on the product surface and the information is not protected against damage or destruction. Moreover, formats of these codes are not capable to be extended to the future digital society needs. The Czech university is looking for project partners for upcoming project aimed at development of new physical method to create machine - readable coinage inside of the product material.

Stránky